Home > CCR Alumina Carrier >

Continuous Reforming Carrier CCR Alumina Carrier SCR-B 1/8 Inch

Product Categories

PDH Alumina Carrier [56]
CCR Alumina Carrier [23]
2-Ethylanthraquinone Hydrogenation Alumina Carrier [30]
Long Chain Alkane Dehydrogenation Alumina Carrier [30]
PDH Catalyst [27]
CCR Catalyst [23]
2-Ethylanthraquinone Hydrogenation Catalyst [31]
C2 Selective Hydrogenation Catalyst [22]
C3 Selective Hydrogenation Catalyst [22]
C4/C5 Hydrogenation Catalyst [22]
Cracked Gasoline Hydrogenation Catalyst [16]
C8/C9 Hydrogenation Catalyst [16]

Qingdao Junyao Catalyst New Material Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Continuous Reforming Carrier CCR Alumina Carrier SCR-B 1/8 Inch

Ask Lasest Price
Brand Name :	CCR carrier
Model Number :	KMC-100

Add to Cart

Product Details
Company Profile

Continuous Reforming Carrier CCR Alumina Carrier SCR-B 1/8 Inch

Product description:

SCR - B carrier has high hydrothermal stability, high stack ratio and high strength, which is suitable for continuous reforming Pt-based catalyst carrier.

Product technical indicators:

item	unit	SCR-B target
Al₂O₃	m%	＞98%
BET surface	㎡/g	190±10
Pile ratio	g/ml	0.66±0.02
Crushing strength	N/Each capsule	≥40
Wear rate	%	＜4
Particle size distribution	Φ1.6～1.8mm	＞98%
Defect rate	m%	＜0.5%
Sn/ Al₂O₃	m%	0.31±0.03
Si/ Al₂O₃	ppm	＜200
Fe/ Al₂O₃	ppm	＜200
Na/ Al₂O₃	ppm	＜70

① For bulk ratio and strength test, the sample shall be baked at 600 ℃ for 2 hours and then tested in a dry atmosphere.

② SCR - B support is suitable for manufacturing all continuous reforming catalysts.

Product packaging

I. The special iron barrel is sealed and packed, and the inner layer is made of moisture-proof plastic bags, with a net weight of 100kg/barrel;

2. Packed in half-ton bags, lined with moisture-proof material bags, net weight 500 kg/bag.

Precautions for storage, transportation and use

I. Pay attention to waterproof and moisture-proof, and prohibit contact with other chemicals and hydrocarbon substances;

II. Do not drop or roll the iron bucket during handling;

III. When the product is used, the water absorption should be tested correctly to avoid rapid moisture absorption in wet weather affecting the impregnation load.

Product Tags:


*From:	Your email address is incorrect!
*To:	Qingdao Junyao Catalyst New Material Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!